Product ID:SOCKETFAST RESIN
MSDS Date:10/01/1985
FSC:8040
NIIN:00N052322
Kit Part:Y
MSDS Number: BVLZP

ITW PHILADELPHIA RESINS CORP

26 COMMERCE DR
MONTGOMERYVILLE, PA 18936
US

Emergency Phone: 215-855-8450

Info Phone: 215-855-8450

Cage: ITWPH

ITW PHILADELPHIA RESINS

454 MONTGOMERYVILLE, PA 18936 US

Telephone: 508-777-1100

Cage: ITWPH

3.6

CAS: 100-42-5

RTECS: WL3675000

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 100 STEL, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SILICA, CRYSTALLINE-FUSED; (SILICON DIOXIDE, AMORPHOUS

CAS: 60676-86-0

RTECS: VV7328000

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:STYRENE AT 400 PPM OR IN STRONG
CONCENTRATIONS IS IRRITATING TO ALL PART OF THE RESPIRATORY TRACT &
EYES. MAY BE FATAL AT 10,000 PPM. SOMEWHAT ANESTHETIC. STYRENE
VAPOR GENERATION OF POLYESTER RESINS WILL RARELY EXCEED 200 PPM.
Explanation of Carcinogenicity:STYRENE: IARC MONOGRAPHS, SUPPLEMENT,
VOL 7, PG 345, 1987: GROUP 2B. ANIMAL: NERVOUS SYSTEM.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: REMOVE FROM EXPOSURE TO WELL VENTILATED AREA. MAKE
COMFORTABLY WARM BUT NOT HOT. USE OXYGEN OR ARTIFICIAL RESPIRATION
AS REQUIRED. SKIN: WASH THOROUGHLY WITH SOAP & WATER. INGEST: SEEK
MD'S ATT ENTION. EYES: FLUSH PROMPTLY WITH COPIOUS AMOUNTS OF WATER
FOR AT LEAST 15 MINUTES & SEEK MD'S ATTENTION.

Flash Point Method:PMCC
Flash Point:87.0F,30.6C
Lower Limits:SEE ING 1
Upper Limits:SEE ING 1
Extinguishing Media:FOAM, CARBON DIOXIDE OR DRY CHEMICAL PER NFPA CLASS
B EXTINGUISHER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . FIGHT LIKE A FUEL OIL FIRE.
Unusual Fire/Explosion Hazard:STYRENE WILL POLYMERIZE READILY AT
ELEVATED TEMPERATURES SUCH AS FIRE CONDITIONS. IF THIS OCCURS IN A
CLOSED CONTAINER THERE IS POSSIBILITY OF VIOLENT RUPTURE.

Spill Release Procedures:REMOVE SATURATED CLTHG PROMPTLY & WASH
AFFECTED SKIN AREAS W/SOAP & WATER. REMOVE ALL SOURCES OF IGNIT
(FLAMES, HOT SURFACES, ELEC STATIC & FRICTIONAL SPKS). VENT AREA.
USE APPROP PROT EQUIP. ABSORB W /INERT MATL SUCH AS VERMICULITE OR
SAND(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE & HANDLE AS NFPA CLASS 1-C
FLAMMABLE LIQ. STORE BELOW 80F (27C) IN CLOSED CNTNR & DRY AREA.
OPEN CNTNRS SLOWLY TO REMOVE ANY INTERNAL PRESSURE.
Other Precautions:IN BULK STORAGE, CHECK VENTS & FLAME ARRESTORS FOR
PLUGGING BY THE FORMATION OF POLYMER. GROUND ALL CONNECTIONS,
CONTAINERS, ETC., WHEN USING.

Respiratory Protection:UP TO 100 PPM STYRENE, NONE NEEDED. 100 PPM &
ABOVE, USE NIOSH/MSHA APPROVED AIR LINE MASK OR SELF CONTAINED
BREATHING APPARATUS.
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT TO COMPLY
W/INGREDIENT LIMITS. (STYRENE IS HVR/AIR). USE EXPLO PROOF MOTOR.
Protective Gloves:NEOPRENE OR NON-SOLUBLE PLASTIC.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:FREQ CLEAN PROT CLOTHING, SHOES, ETC, TO
AVOID SKIN CONTAM. EMERG EYEWSH & DLGE SHWR MTG ANSI DSGN CRITERIA
.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC: & PLACE IN CLSD CNTNRS FOR DISPOSAL AS SOLID WASTE. WASH
AREA W/TRISODIUM PHOSPHATE & WATER.

Boiling Pt:B.P. Text:>293F,>145C
Vapor Pres:SEE ING 1
Vapor Density:SEE ING 1
Spec Gravity:1.74 (H*2O=1)
Evaporation Rate & Reference:<1 (ETHER =1)
Appearance and Odor:OPAQUE TAN FLOWABLE LIQUID WITH TYPICAL STYRENE
ODOR.
Percent Volatiles by Volume:<24

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, PEROXIDE AND OTHER OXIDIZING AGENTS.
Stability Condition to Avoid:SUNLIGHT, OPEN FLAMES, CONTAMINATION &
PROLONGED STORAGE ABOVE 100F.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:RESIN THAT HAS BEEN MIXED WITH HARDENER SHOULD
BE MIXED WITH AN INERT FILLER & REMOVED TO AN OPEN AREA. ALLOW TIME
TO GEL & CURE. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.